by magneto
magneto is from Cobra ODE Support
We have released the beta for the 2k fix as well a beta for the QSV freezing issues.
[BETA] Fix for v4.20
We are releasing a beta for those who are having issues with the 2k model and using the 4.20.
More specifically, this fixes the issue where the drive is unresponsive unless you turn the PS3 on using the eject button. This update will also fix the issue for fat and 2k models where the auto-eject feature will eject and reload the disc instead of simply emulating it.
If you have a 4.20 board version, and have one of these issues and you are ready to test this update, then please test this beta and report to us whether or not it fixes the problems. Include as much information as possible.
You can download the beta here : http://www.sendspace.com/file/z4vn2d
The instructions are in the README.TXT file, make sure you follow the instructions very carefully.
Here are the instructions for updating the FPGA image and testing the beta :
DISCLAIMER: This is a beta update, use at your own risks. You must follow these instructions carefully. Make sure not to interrupt the process.
Step 1 : Remove power from PS3 and wait for a couple of minutes
Step 2 : Copy ldr.rom into a FAT32 usb drive and insert into ODE
Step 3 : Power the board to update the bootloader. Make sure the LED turns purple for 1 second to confirm the bootloader has been flashed
Step 4 : Remove power from PS3 and wait for a couple of minutes
Step 5 : Delete ldr.rom and copy fpga1.dat into a FAT32 usb drive and insert into ODE
Step 6 : Power the board and let the bootloader update the FPGA image. If the LED turns off quickly, there was an error. The correct behavior is the LED will flash between RED and PURPLE continuously for about 2 minutes, then it will turn itself off.
Step 7 : Only after the LED goes off, which should take about 2 minutes, then remove the USB from the ODE
Step 8 : Delete the fpga1.dat file. This is important, if you do not delete it, it will continually update the FPGA.
Step 9 : Remove power from the ODE
Step 10 : Insert USB into the PS3 and reconnect power.
Notes :
You must first update the bootloader before updating the FPGA image. The new bootloader is required to successfully flash the FPGA image, and it is preferred at this point to update each rom individually to make sure the update process was completed successfully.
When the FPGA update is finished, the bootloader will turn off the LED and stop, it will not boot into the main MCU application, so you must power cycle the ODE in order to boot it again.
The FPGA will be flashed whenever fpga1.dat file is found on the USB, so it is important to delete the file once the update has completed and before power cycling the ODE or it will update it forever.
If you wish to revert back to the original FPGA image, start at step 5, and use the fpga1_original.dat file. Make sure to rename the file into fpga1.dat before trying the update.
[BETA] Fix for QSV Freezing issues
We are releasing a beta for those who are having issues with the QSV model. Hopefully, this version will fix the freezing issues that have been reported and the boards will be cooler.
If you have a QSV version, a hot board which freezes often, and you are ready to test this update, then please test this beta and report to us whether or not it fixes the problems. Include as much information as possible.
You can download the beta here : http://www.sendspace.com/file/xcbzzl
The instructions are in the README.TXT file, make sure you follow the instructions very carefully.
Here are the instructions for updating the FPGA image and testing the beta :
DISCLAIMER: This is a beta update, use at your own risks. You must follow these instructions carefully.
This update will only work on Cobra ODE QSV
Make sure not to interrupt the process.
Step 1 : Remove power from PS3 and wait for a couple of minutes
Step 2 : Copy ldr.rom into a FAT32 usb drive and insert into ODE
Step 3 : Power the board to update the bootloader. Make sure the LED turns purple for 1 second to confirm the bootloader has been flashed
Step 4 : Remove power from PS3 and wait for a couple of minutes
Step 5 : Delete ldr.rom and copy mcu.rom into a FAT32 usb drive and insert into ODE
Step 6 : Power the board to update the MCU. Make sure the LED turns purple for 1 second to confirm the MCU has been updated.
Step 7 : Remove power from PS3 and wait for a couple of minutes
Step 8 : Delete mcu.rom and copy fpga1.dat into a FAT32 usb drive and insert into ODE
Step 9 : Power the board and let the bootloader update the FPGA image. If the LED turns off quickly, there was an error. The correct behavior is the LED will flash between RED and PURPLE continuously for about 2 minutes, then it will turn itself off.
Step 10 : Only after the LED goes off, which should take about 2 minutes, then remove the USB from the ODE
Step 11 : Delete the fpga1.dat file. This is important, if you do not delete it, it will continually update the FPGA.
Step 12 : Remove power from the ODE
Step 13 : Insert USB into the PS3 and reconnect power.
neue Fix Updates findet ihr ab dem nächsten Beitrag
