FÜR ALLE DIE MIT DER INSTALLATION EINER FIRMWARE ODER BEI FIRMWARE/HOMEBREW INSTALLATIONEN BESTEHT ACHTET BEI ALLEN IMMER DARAUF WAS/WIE IHR AUF EURER KONSOLE Es darf sich beim Updaten/Downgraden SEHR WICHTIG: KONSOLEN DIE AB WERK ÜBER FIRMWARE 3.55 AUSGELIEFERT WURDEN UND BEI HARDWAREDOWNGRADETEN PS3´s MUSS DER SYSCON CHIP DURCH DIE INSTALLATION DAZU KÖNNTET IHR AUCH ToggleQA INSTALLIEREN, DIE SYSTEM UPDATE DEBUG [BLINK]HINWEIS: WIR RATEN DRINGENDS DAZU ToggleQA GRUNDSÄTZLICH ZU INSTALLIEREN SOMIT WÄRE DER SYSCON CHIP AUCH ZURÜCKGESETZT UND MIT EINER ROGERO CFW 4.xx KÖNNEN MOMENTAN ALLE ENGLISCHE DETAILS & ÄNDERUNGEN AN DEN ROGERO CFW´s 4.xx Original Text von Rogero via Tortuga-Cove.com Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 With LV1 Peek/Poke Support Posted on Tuesday 20/Nov/2012 Link -------> multiMAN ver 04.12.00 BASE CEX (20121120).pkg ( Clicked 278 times ) * Added full support for Rogero 4.30CFW Version 2.00 Link -------> Showtime ver 04.01.224.pkg ( Clicked 191 times ) N.B: You must have multiMAN version 04.12.00 installed on the PS3 before updating to CFW4.30 v2.00 or you won't be able to install Package files until you downgrade again to version 3.55 and Install multiMAN 04.12.00 Link -------> Rogero_CEX4.30_V2.00.PUP ( Clicked 772 times ) CFW4.30 Version 2.00 MD5: 116ecceb79b2adde8479fd24951a5a90 Link -------> Rogero_CEX4.21_V2.00.PUP ( Clicked 157 times ) CFW4.21 Version 2.00 MD5: 9e3053031c58490ebaf5ea5e6c7cb34c This CFW4.21 is almost the same as the 4.30 version except it have some add-ons that can't be added to ver 4.30 currently: This CFW was tested on most PS3 Models by different testers and no problems were encountered. * For details about Updating from any CFW to CFW4.30/4.21 v2.00 Please read the Guide below * For details about Downgrading back to CFW/OFW3.55 Please read the Downgrade Guide below Rogero CFW4.30/4.21 v2.00 Details 4.21 v2.00 ATTENTION: 1- This CFW does have LV1 checks disabled and can be installed on Downgraded PS3 consoles even if not dehashed after downgrade. Just in case anyone still need to dehash, here's the link Link ----> Dehashing Tutorial 2- Always make a NOR/Nand dump using multiMAN before installing any CFW to have a recovery backup in case of any bricks. 3- The QA flag is better to be always Enabled on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg 4- Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks. 5- DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First. 6- You need to be already on a 3.55OFW or 3.55+ CFW to install this. Installing from any OFW > 3.55 won't work. (Hardware Flasher needed) - Updating from CFW3.55/4.21/4.30 to the CFW4.21/4.30 v2.00 should be done using the following steps : 1- If you are on any CFW newer then 3.55 you can try updating from Recovery Mode to CFW4.21/4.30 v2.00. 2- Once on Rogero CEX3.55 v3.7 or any 3.55OFW/CFW, Update using the XMB update option to CFW4.21/4.30 v2.00 - Downgrading back to 3.55 is always possible using the following steps : 1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly. - Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP Useful Hint ( for Slims / FATs with NOR Flash only - Changing/Upgrading the HDD while on Rogero CFW4.30 should be done using the following steps : 1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly. - Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP Useful Hint ( for Slims / FATs with NOR Flash only Credits to : Quelle: Tortuga-Cove.com ROGERO CFW 4.21 v.1.0 - This is a 4.21CFW spoofed to version 4.25 to allow SEN access 1- 2- It is not the years in your life that count. It is the life in your years. ROGERO CFW 4.21 v.1.09 - Compatibility problem with some Slim models (CECH-25xx) is now fully fixed. ROGERO CFW 4.30 v.1.0 ÄNDERUNGEN DOWNLOADS ZU ALLEN ROGERO CFW VERSIONEN: [UPDATE/SUPPORT] ROGERO CEX 4.xx WICHTIG: DIE ROGERO CFW 4.21 v.1.09 NICHT MIT FAT PS3 SOLLTE DOCH EIN BRICK ENSTANDEN SEIN [Info] Brick! was kann ich jetzt noch machen HILFREICHE PS3-TOOLS BEITRÄGE ZUM THEMA CFW 4.xx Alternativ sind die Downloads im Normalfall auch hier zu finden:
SONSTIGEN MANIPULATIONEN AN DER PS3 NICHT VERTRAUT SIND.
IMMER DAS RISIKO DAS DIE KONSOLE BRICKT.
INSTALLIERT & HALTET EUCH EXAKT AN DIE TUTORIALS/ANLEITUNGEN
KEINE DISK IM LAUFWERK BEFINDEN !!!
DIE ROGERO CFW´s 4.xx SIND NUR
BIS FIRMWARE 3.55 INSTALLIERBAR !!!
DOWNGRADEFÄHIG SIND MÜSSTEN EINEN HARDWAREDOWNGRADE ERHALTEN.
EINER FIRMWARE 3.41/3.55 ÜBER DAS RECOVERY MENÜ RESETET WERDEN !!!
AUF ON STELLEN UND PER RECOVERY MENÜ EINE OFW 3.41/3.55 INSTALLIEREN.
DA DAS QA-FLAG NUR BIS FIRMWARE 3.55 GESETZT WERDEN KANN !!![/BLINK]
DIE INSTALLATION EINER ROGERO CFW 4.xx KANN BEGINNEN.
SPIELE OHNE GEPATCHTE EBOOTS ABGESPIELT WERDEN.
Rogero CEX-4.30 v2.00 (multiMAN /Showtime Pack)
Prepared by DeanK for full compatibility with CFW v2.00
- LV1 peek/poke support
- PS1 disc backups support
- Direct Disc Access support
* Added new function in "Home" column - "* Install Package Files"
* Added new option in "Settings" - "Install Package Files Method"
- User can pick from either "Standard" or "PSN Style (bubble)" modes
- Bubble mode shows installable packages as PSN downloaded content in Game column (or under Rebug's Package Manager/PSN Content)
- To select a package file (*.pkg):
-- Use [* Install Package Files] option in Home column or
-- double click on a pkg file in mmOS/File Manager (when "bubble" method is used the PS3 will reboot)
* Fixed copying of AVCHD/Blu-ray movie backups from Video column
CFW4.30 Version 2.00 Size: 191 MB (201,263,364 bytes)
CFW4.21 Version 2.00 Size: 191 MB (201,153,979 bytes)
1- It does have the default "Install Package Files" node on XMB. (no need to have multiMAN installed before using it)
2- It does have LV1 Checks Disabled and can be used directly instead of Rogero3.55 v3.7 while downgrading with Hardware Flashers.
3- It does have the Proper Cinavia Disabled Files for the users who needs it.
But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.
4.30 v2.00
- Rebuilt from scratch using OFW4.30 files only (no DEX/SEX files) with official XMB and full features working as in OFW4.30
- All known problems like XMB icons sorting and Demo Mode issues from v 1.04 are now all gone with the use of the official XMB.
- Removed the classical "Install Package Files" Icon from XMB to have a 100% original XMB (no DEX/SEX files used).
- Installing Package Files can be done from multiMAN 04.12.00 (XMMB Home column or MMOS File Manager).
- Patched LV1 to disable LV2 Protection.
- Patched LV1 to add peek/poke support to replace hvc 182/183 (multiMAN Direct Disc Access is now working fine with CFW4.21/4.30 v2.00)
- Patched LV1 to disable SYSTEM MANAGER INTEGRITY CHECK (to prevent Bricking on non-dehashed downgraded consoles)
- Patched LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles)
- Patched LV2 to add peek/poke support. (for both LV1 and LV2)
- Patched VSH to enable ReActPSN compatibility (Allow Unsigned act.dat and *.rif files, Disable Unlinking/Deleting of act.dat)
- Spoofed the system version to latest OFW version 4.31.
- PSN/SEN access is available as long as the current "passphrase" still the same.
- Loading games from App_home Icon is now fixed.
- It can run games signed with Keys up to version 4.30 without any Eboot/Sprx patching needed
- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
- Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21/4.30
- Same Features as CEX_4.30 v2.00 plus the following add-ons:
1- It does have the default "Install Package Files" node on XMB. (no need to have multiMAN installed before using it)
2- It does have LV1 Checks Disabled and can be used directly instead of Rogero3.55 v3.7 while downgrading with Hardware Flashers.
3- It does have the Proper Cinavia Disabled Files for the users who needs it.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a chance to recover when you have a valid dump.
** A Hardware Flasher alone without a valid dump may not fix your bricked PS3 **
---- If it didn't work (Data corrupted Error), then you'll have to Downgrade back to Rogero CEX3.55 v3.7 using the guide below.
---- If it didn't work (Data corrupted Error), Start the PS3 into Recovery Menu and update yo CFW4.21/4.30 v2.00.
- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP
...Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.30, go to System Update from XMB and install the Downgrader PUP.
- After the Downgrader PUP installs you'll be on a hybrid CFW3.55 that will still shows ver4.21/4.30 from system settings.
- Enable QA flag by following these steps:
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any CFW 3.55/4.21/4.30.
you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0
- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP
Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- Swap the current HDD with the New HDD, Turn the PS3 on, follow screen instructions and let it install the Downgrader CFW.
- After the Downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any CFW 3.55/4.21/4.30.
you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0
- PS3DevWiki for the valuable and always up-to-date source of information.
- Deank for his continuous efforts on Multiman and all his assistance during the build process.
- Cybrskunk for the hints about fixing the UPL package and the Build number ( although it didn't work yet as it should )
- Tortuga-cove staff for the support forum.
- Andoma for his work on his excellent Showtime Media Player.
- All the Beta-Testers and all Tortuga-Cove members for their support and patience.
It is not the years in your life that count. It is the life in your years.
ENGLISCHE DETAILS & ÄNDERUNGEN VIA TORTUGA-COVE.COM
- It can be used as a normal System Update from any 3.55 OFW/CFW/MFW
- It was tested using a hardware flasher and no bricks or any problems at all were encountered
- It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
- Games must be loaded from Disc Icon (with Original game in BD) and not from app_home
- Current 3.55 homebrew application can't be loaded on this CFW, applications must be re-signed properly.
Credits to eussNL and the PS3DevWiki for the valuable and always up-to-date source of information.
Credits to Deank for his continuous efforts on Multiman and many other PS3 tools/fixes.
ENGLISCHE DETAILS & ÄNDERUNGEN VIA TORTUGA-COVE.COM
- XMB Icons problem from in-game PS button is now fixed.
- Loading games from App_home Icon is now fixed.
- Many other fixes from version 1.00 for a better performance and added stability.
- It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
- It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
- Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21.
- Compatibility problem with some PS3 models is now fully fixed.
- XMB Icons problem from in-game PS button is now fixed. (Using the Patch included in the package: "PS3~dev_blind.zip")
- PSN/SEN access is available as long as the current "passphrase" still the same.
- Loading games from App_home Icon is now fixed.
- It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
- It can run games signed with Keys up to version 4.30 without any Eboot/Sprx patching needed
- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
- Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21.
VERSIONEN CHECHAxx BIS CHECHxx VERWENDEN.
ES BESTEHT EIN SEHR HOHES BRICKRISIKO UND INSTALLATIONEN
EINER CFW 4.XX GESCHEHEN GRUNDSÄTZLICH AUF EIGENE GEFAHR !!!
KÖNNTE DIESER BEITRAG WEITERHELFEN:
PS 3 Firmware Archiv von A - Z